dual solenoid control

Heim

dual solenoid control

  • How Series-Parallel Dual Solenoid Control Improves ESD Valve Reliability | GEKO Valve
    How Series-Parallel Dual Solenoid Control Improves ESD Valve Reliability | GEKO Valve
    Nov 17, 2026
      How Series-Parallel Dual Solenoid Control Improves ESD Valve Reliability | GEKO Valve For gas turbine pressure regulating stations, the ESD (Emergency Shutdown Valve) acts as the critical safety barrier to cut off natural gas supply under abnormal conditions. Single-solenoid pneumatic control has long been a pain point, as a single solenoid failure can trigger unexpected valve closure and unit trip. GEKO Valve introduces a proven series-parallel dual two-position three-way solenoid configuration to boost the safety and availability of ESD valves for gas power plants.   What Is the Series-Parallel Dual Solenoid Control Loop for ESD Valves? The control loop adopts two 2-position 3-way solenoid valves arranged in a special series-parallel pneumatic layout.  Under normal steady operation, both Solenoid 1 and Solenoid 2 remain energized continuously. Port 2 connects to Port 1 while exhaust Port 3 is sealed. Compressed air flows through Solenoid 1 to supply air pressure to the pneumatic actuator of the GEKO ESD valve. Working Logic of the Redundant Solenoid Design 1. Single Solenoid Fault Condition If Solenoid 1 fails and de-energizes, its Port 1 switches to exhaust Port 3 and Port 2 is blocked. Thanks to the series-parallel layout, compressed air can still pass through Solenoid 2 and feed the ESD actuator. The GEKO ESD valve maintains its open position without losing air supply, avoiding nuisance shutdown. 2. Emergency Shutdown Condition To close the ESD valve for safety isolation, both solenoid valves must de-energize at the same time. Once both lose power, Port 2 of each solenoid is shut off, and Port 1 communicates with exhaust Port 3. The actuator air pressure vents out, and the GEKO fail-safe ESD valve closes immediately to isolate natural gas flow. With this design, the ESD valve will only trip when both solenoids malfunction, greatly lowering false trip risk. Power Supply Redundancy: The Second Layer of Safety Dual solenoid pneumatic redundancy alone is not enough. If both solenoids share one single power source, simultaneous power loss will still cause unintended ESD valve closure. GEKO recommends an independent redundant power architecture for this safety loop: Power from unit redundant UPS (or DC bus for DC solenoids) Two separate dual power switching modules Each switching module supplies power to one solenoid independently This separated power scheme eliminates common-cause power failure and matches the high safety requirement of gas turbine SIS loops. Maintenance & Operational Best Practices for GEKO ESD Valves Redundant hardware cannot replace routine management. GEKO Valve advises plant operators to build a complete solenoid asset management system: Maintain detailed solenoid registers, tracking service time, working environment and overhaul records Schedule periodic replacement for solenoids running for extended periods or in harsh high-humidity, dusty gas station environments Carry out regular partial stroke testing and full stroke testing on pneumatic ESD assemblies to detect hidden solenoid defects early Inspect air supply quality, filter condition and exhaust path during each outage window Why Choose GEKO ESD Valves for Gas Turbine Pressure Regulating Stations? GEKO emergency shutdown valves are engineered for natural gas, combined cycle power and process safety applications. Matched with optimized dual-solenoid redundant control solutions, GEKO ESD valves balance high safety integrity and operational availability. The fail-close pneumatic actuator package, certified sealing performance and robust construction make them a trusted choice for critical gas isolation duty on turbine regulating skids. Final Takeaway Series-parallel dual 3-way solenoid control is a practical and cost-effective upgrade to reduce nuisance trips of ESD valves. Combined with independent dual power supply and scheduled functional testing, this architecture delivers reliable safety protection for gas turbine sites. If you need technical support or quotation for GEKO ESD valves and solenoid control manifolds for your regulating station, contact our engineering team today.
    MEHR LESEN

Eine Nachricht hinterlassen

Eine Nachricht hinterlassen
Wenn Sie an unseren Produkten interessiert sind und weitere Details wissen möchten, hinterlassen Sie hier eine Nachricht, wir werden Ihnen so schnell wie möglich antworten.
EINREICHEN

Heim

PRODUKTE

Kontakt